Master Mould WB

$3,200.00

SKU: CMTCCH-010 Category: Tag:

Water Based Emulsion Mould Release Agent

Product Description:

Master Mould WB is water based blend of refined mineral oil and emulsifying agent. Which form a thin film release agent on formwork that allows for easy and fast striking.

Uses:

Master Mould WB is ready for use on
 Fibre Moulds
 Rubber moulds
 Steel Shuttering
 Plywood & wood shuttering
 Plastic Formwork

Benefits:

Master Mould WB achieve following properties
 Good adhesion to formwork
 Reduce damages and blowholes
 Promoting high quality fair faced even with white cement
 Reduce cleaning of form work before reuse
 Suitable to use with virtually all types of formwork

Additional information

Technical Data

Type : Water Based Emulsion
Form : liquid
Colour : Milky White
Density @ 25 degree C : Approx. 1.0± 0.05 Kg/Lit
Chloride Content : Nil ( EN 934-2)
Coverage : Approx. 10 to 50 m² / Lit ( 15 to 35 ml/m²)
Flash Point : Not Applicable

Packaging

Available in 20 Lit, 200 Litres containers.

Storage

Store in a dry cool place.

Shelf life

Min. 12 months from date of production if stored properly under shade in original unopened packing.

Application Details

Master Mould WB is ready to use product just apply a very thin layer with brush, roller, cloth or by spray. Ensuring surface is clean and sound without any residue.

Important

Do-not apply excessive material
 Uneven application may appear on concrete surface
 All areas and equipment’s come into contact with Master Mould WB must be clean thoroughly with soap and Luke warm water to remove any residue.

Safety precautions

Use and wear personal protective like gloves, goggles, boots and clothing. Any accidental splashes to eyes or skin must be thoroughly cleaned with water.

Reviews

There are no reviews yet.

Be the first to review “Master Mould WB”

Your email address will not be published. Required fields are marked *