Master Rep FC30

$3,200.00

SKU: CMTCCH-005 Category: Tag:

Cement based fair face repair mortar and skim coat, for up to 3mm thickness.

Product Description:
Master Rep FC30 is cement based polymer modified powder, used as a surface leveling and repairs of hair line cracks up to 3.0 mm. Especially prepared for middle-east Humid, hot and tropical climates.

Uses & Advantages:It can be used as in one or two coats, on GRC Blocks, Pre-Cast surfaces, home and factory walls and ceilings before painting for internal and external use.
 Suitable for filling pin holes and hairline cracks for fair face cosmetic repair and surface re-profiling up to 3mm
 Weather Resistance lining, abrasion, corrosion, crack resistance.
 As crack filler for more than 3mm gap, use 30% of 1mm silica sand.
 Compatible with all types of Paint and coatings

Additional information

Technical Data

Appearance : Powder
Color : Grey/White
Yield : 15.5 Litre / 20 Kg bag (mix water 6 Ltr.)
Wet Density (BS EN 12350-6) : 1.60 – 1.65 Kg/L
Pot life : 90 min @ 25 oC
Aggregate Grading : Up to 0.3 mm
Layer Thickness : 1.0 mm to 3.0 mm
Pull-off Adhesion Test (BS EN 1015-12) : >1.2 N/mm2
Consumption : 1-2 Kg/m2/mm
VOC & Formaldehyde Cont. : None

Standard Compliance

QCS2014 Section 24 Part 2.4.6 (2)

Packaging

Available in 20 Kg Bag

Subsrate Preparation

Concrete/Masonry substrate must be clean from loose particles, grease, oil etc. In hot weather, it is recommended to moisten the substrate with wet sponge or apply primer before application.

Product Application

Add about 5.5 to 6.0 liter of water per 20 kg bag. And mix it properly at least for 3 minutes. Always add powder to water. Apply the prepared paste using steel trowel or stucco blade up to thickness of 2-3mm in one layer.

Safety precautions

Use and wear personal protective like gloves, goggles, boots and clothing.

Reviews

There are no reviews yet.

Be the first to review “Master Rep FC30”

Your email address will not be published. Required fields are marked *