MasterRep T500x

$3,200.00

SKU: CMTCCH-006 Category: Tag:

Fibre Reinforced, Thixotropic, Non-shrink Repair Mortar

Product Description:

MasterRep T500x is a ready to use structural repair mortar, can be used where high strength, high adhesion and sulphate or sea water resistance properties required. Suitable for use in hot and tropical climates.

Uses:
Used for structure repair of horizontal, overhead and vertical areas.
 For structural load bearing surfaces.
 Structure restoring, honey combing, edges repair
 Reinforcing of weak structures like balcony, Cornice area and pedestrian path ways.

Features:
 Fibre Reinforced
 Non-Shrinking
 Crack Resistant
 Sulphate or sea water resistant
 Thixotropic
 Prevents corrosion

Additional information

Technical Data

Appearance : Grey Powder
Free from Chlorides and metallic particles.
Yield : 12 Litre/25 Kg Bag
Wet Density (BS EN 12350-6) : 2.1 ± 0.05 Kg/Litre
Aggregate Grading : Dmax 0 – 4 mm ( EN : 12192-1)
Layer Thickness : 5 mm to 50 mm
Compressive strength (ASTM C12390-3) : 01 day >25 N/mm2 07 days >50 N/mm2 28 days >65 N/mm2
Flexural Strength (BS EN 196-1) : 28 days >7 N/mm2
Pull-off Strength (ASTM 4541) : >2.5 N/mm2
Dry Shrinkage (ASTM C157) : <500 microstrain @ 28 days
Water Penetration (DIN 1048) : <5mm
VOC, Formaldehyde Cont. : None (ISO/FDIS 11890-2/GC-MS)

Packaging

Available in 25 kg per bag.

Shelf Life

12 months from date of production, properly store in original pack under shade.

Mixing

Add 3.5 litre of water and mix it properly with slow-speed electric drill for at-lest 3 minutes. Always add powder to water and continue stirring until mixture is free from lumps and smooth & creamy consistency is obtained. Use cool water if temperature is above 35 ºC.

Application

MasterRep T500x can applied with trowel or by spray. It must be used within one hour from mixing depending upon weather conditions. It can be applied up to thickness of 50 mm. Apply in two layers for thickness more than 50mm.

Curing

After application, surface must be cured for at least 3 days with water. Avoid rapid drying and excessive heat. Use moist hessian cloth or plastic sheet for curing or use curing compound Master Cure AW.

Cleaning

All areas and equipment’s come into contact with MasterRep T500x must be clean thoroughly with water to remove any residue

Safety Precautions

MasterRep T500x contains cement which release alkali with water, it may harm to skin. Use and wear personal protective like gloves, goggles, boots and clothing. Any accidental splashes to eyes or skin must be thoroughly cleaned with water.

Reviews

There are no reviews yet.

Be the first to review “MasterRep T500x”

Your email address will not be published. Required fields are marked *