6

MasterCrete MC200

$3,200.00

SKU: CMTCCH-009 Category: Tag:

Free Flowing Micro-Concrete for Structural Repair & Grouting

Product Description:
MasterCrete MC200 is one component, High Strength, Free Flowing micro-concrete for all structural repairs. Suitable for use in hot and tropical climates.

Uses:
 Suitable for large structural & load bearing repairs
 Repair of inaccessible areas
 Reprofiling of damaged concrete members
 Filling of shutter tie rod, machine base and pole base.
 Closing or filling around concrete and water pipes or tanks, swimming pools etc.

Features:
 Excellent bonding to concrete
 High early & ultimate strength
 Low permeability ensure the durability of the hardened concrete
 Expansion element lessens shrinkage in the plastic and hardened stage
 Excellent initial flow and flow retention

Additional information

Technical Data

Appearance : Grey Powder
Free from Chlorides and metallic particles.
Yield : 12.5 Litre/25 Kg bag (mix water 2.75 Lit)
Wet Density (BS EN 12350-6) : 2.1 ± 0.1 Kg/Litre
Aggregate Grading : Dmax 0 – 10 mm ( EN : 12192-1)
Layer Thickness : 50 mm to 200 mm
Compressive strength (BSEN 12390-3) : 01 day >35 N/mm2 07 days >55 N/mm2 28 days >65 N/mm2
Flexural Strength (BS EN 196-1) : 28 days >8.0 N/mm2
Pull-Off (ASTM D4541) : >2.0 N/mm2
Standard Compliance

QCS2014 Section 5 Part 16.6
Packaging

Available in 25 Kg per Bag
Shelf life

12 months from date of production, properly store in original pack under shade.
Surface Preparation

Surface must be clean from any loose particle, grease, oil etc. Concrete substrate should be pre-wetted with water at least 3-4 hours prior to pouring the grout. Standing water should be removed prior to placing the grout.
Mixing

Add 2.75 to 3.0 litre of water for fluid consistency and mix it properly with slow-speed electric drill. Always add powder to water and continue stirring until mixture is free from lumps and smooth & creamy consistency is obtained. Mixing time should be approximately 3 minutes. Use cool water if temperature is above 35 ºC.
Apply

Mixed micro-concrete should be poured at one point to avoid entrapping air. For best results, material should be poured within 10 to 15 minutes of mixing. Pouring should be carried out continuously so ensure to have enough material ready to place. Ensure no material loss through formwork or between unsealed joints. Plug unsealed joints immediately.
Curing

Avoid rapid drying and excessive heat. Use moist hessian cloth or plastic sheet for curing or use curing compound Master Cure A.
Cleaning

All areas and equipment’s come into contact with MasterCrete MC200 must be clean thoroughly with water to remove any residue.
Safety Precautions

MasterCrete MC200 contains cement which release alkali with water, it may harm to skin. Use and wear personal protective like gloves, goggles, boots and clothing. Any accidental splashes to eyes or skin must be thoroughly cleaned with water.

Reviews

There are no reviews yet.

Be the first to review “MasterCrete MC200”

Your email address will not be published. Required fields are marked *

Related products